Ospf路由重分部到rip

Ospf路由重分部到rip  
Ospf路由重分部到rip   Route3为自制系统路由协议ASBR,通过Route0进行路由重分布,Route0、Route1、Route2为骨干区域area0. 网段划分: Route0-route1 172.16.0.0/24 Route1-route2 172.16.1.0/24 Route0-route2 172.16.2.0/24 Route3-route0 10.0.0.0/24 Route0配置: 基本借口配置: Int f0/0 ip add 172.16.0.1 255.255.255.0          No shut(此命令在配置中只显示一次) Int f0/1 ip add 10.0.0.2 255.255.255.0 Int f1/0 ip add 172.16.2.1 255.255.255.0 Ospf配置: Conf)router ospf 100 Net 172.16.0.0 0.0.0.255 area 0 Net 172.16.2.0 0.0.0.255 area 0 Net 10.0.0.0 0.0.0.255 area 0 Route 1和Route 2配置类似,在此不再显示。 接下来配置Route 3 Rip路由器: 基本接口配置: Int f0/0 ip add 192.168.0.1 255.255.255.0 Int f0/1 ip add 10.0.0.1 255.255.255.0 重分部Ospf配置: Conf)router ospf 20 Net 172.16.0.0 0.0.0.255 area 0 Net 172.16.2.0 0.0.0.255 area 0 Redistribute rip subents 路由重分部到Rip: Conf)route rip Version 2 Net 10.0.0.0 Net 192.168.0.0 添加一条到ASBR路由器的默认路由: Conf)ip route 0.0.0.0 0.0.0.0 10.0.0.0.2   _______________________________ 配置信息: R0: Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP        D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area        N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2        E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP        i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area        * – candidate default, U – per-user static route, o – ODR        P – periodic downloaded static route Gateway of last resort is not set      10.0.0.0/24 is subnetted, 1 subnets C       10.0.0.0 is directly connected, FastEthernet0/1      172.16.0.0/24 is subnetted, 3 subnets C       172.16.0.0 is directly connected, FastEthernet0/0 O       172.16.1.0 [110/2] via 172.16.0.2, 01:17:50, FastEthernet0/0 C       172.16.2.0 is directly connected, Ethernet1/0   ___________________ show ip ospf int   FastEthernet0/0 is up, line protocol is up   Internet address is 172.16.0.1/24, Area 0   Process ID 100, Router ID 172.16.2.1, Network Type BROADCAST, Cost: 1   Transmit Delay is 1 sec, State DR, Priority 1   Designated Router (ID) 172.16.2.1, Interface address 172.16.0.1   Backup Designated Router (ID) 172.16.1.1, Interface address 172.16.0.2   Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5     Hello due in 00:00:07   Index 1/1, flood queue length 0   Next 0x0(0)/0x0(0)   Last flood scan length is 1, maximum is 1   Last flood scan time is 0 msec, maximum is 0 msec   Neighbor Count is 1, Adjacent neighbor count is 1     Adjacent with neighbor 172.16.1.1  (Backup Designated Router)   Suppress hello for 0 neighbor(s) Ethernet1/0 is up, line protocol is up   Internet address is 172.16.2.1/24, Area 0   Process ID 100, Router ID 172.16.2.1, Network Type BROADCAST, Cost: 10   Transmit Delay is 1 sec, State DR, Priority 1   Designated Router (ID) 172.16.2.1, Interface address 172.16.2.1   Backup Designated Router (ID) 172.16.2.2, Interface address 172.16.2.2   Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5     Hello due in 00:00:03   Index 2/2, flood queue length 0   Next 0x0(0)/0x0(0)   Last flood scan length is 1, maximum is 1   Last flood scan time is 0 msec, maximum is 0 msec   Neighbor Count is 1, Adjacent neighbor count is 1     Adjacent with neighbor 172.16.2.2  (Backup Designated Router)   Suppress hello for 0 neighbor(s) FastEthernet0/1 is up, line protocol is up   Internet address is 10.0.0.2/24, Area 0   Process ID 100, Router ID 172.16.2.1, Network Type BROADCAST, Cost: 1   Transmit Delay is 1 sec, State DR, Priority 1   Designated Router (ID) 172.16.2.1, Interface address 10.0.0.2   No backup designated router on this network   Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5     Hello due in 00:00:03   Index 3/3, flood queue length 0   Next 0x0(0)/0x0(0)   Last flood scan length is 1, maximum is 1   Last flood scan time is 0 msec, maximum is 0 msec   Neighbor Count is 0, Adjacent neighbor count is 0   Suppress hello for 0 neighbor(s) _________________________ R1: ____________________Show ip route Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP        D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area        N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2        E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP        i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area        * – candidate default, U – per-user static route, o – ODR        P – periodic downloaded static route   Gateway of last resort is not set        10.0.0.0/24 is subnetted, 1 subnets O       10.0.0.0 [110/2] via 172.16.0.1, 00:48:00, FastEthernet0/0      172.16.0.0/24 is subnetted, 3 subnets C       172.16.0.0 is directly connected, FastEthernet0/0 C       172.16.1.0 is directly connected, FastEthernet0/1 O       172.16.2.0 [110/11] via 172.16.0.1, 01:26:34, FastEthernet0/0                    [110/11] via 172.16.1.2, 01:25:27, FastEthernet0/1   ____________________show ip ospf int FastEthernet0/0 is up, line protocol is up   Internet address is 172.16.0.2/24, Area 0   Process ID 200, Router ID 172.16.1.1, Network Type BROADCAST, Cost: 1   Transmit Delay is 1 sec, State BDR, Priority 1   Designated Router (ID) 172.16.2.1, Interface address 172.16.0.1   Backup Designated Router (ID) 172.16.1.1, Interface address 172.16.0.2   Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5     Hello due in 00:00:04   Index 1/1, flood queue length 0   Next 0x0(0)/0x0(0)   Last flood scan length is 1, maximum is 1   Last flood scan time is 0 msec, maximum is 0 msec   Neighbor Count is 1, Adjacent neighbor count is 1     Adjacent with neighbor 172.16.2.1  (Designated Router)   Suppress hello for 0 neighbor(s) FastEthernet0/1 is up, line protocol is up   Internet address is 172.16.1.1/24, Area 0   Process ID 200, Router ID 172.16.1.1, Network Type BROADCAST, Cost: 1   Transmit Delay is 1 sec, State DR, Priority 1   Designated Router (ID) 172.16.1.1, Interface address 172.16.1.1   Backup Designated Router (ID) 172.16.2.2, Interface address 172.16.1.2   Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5     Hello due in 00:00:04   Index 2/2, flood queue length 0   Next 0x0(0)/0x0(0)   Last flood scan length is 1, maximum is 1   Last flood scan time is 0 msec, maximum is 0 msec   Neighbor Count is 1, Adjacent neighbor count is 1     Adjacent with neighbor 172.16.2.2  (Backup Designated Router)   Suppress hello for 0 neighbor(s)   _________________________ R3: __________________show ip route      10.0.0.0/24 is subnetted, 1 subnets C       10.0.0.0 is directly connected, FastEthernet0/1 S*   0.0.0.0/0 [1/0] via 10.0.0.2   _______________show ip ospf Routing Process “ospf 20” with ID 192.168.0.1  Supports only single TOS(TOS0) routes  Supports opaque LSA  It is an area border router  SPF schedule delay 5 secs, Hold time between two SPFs 10 secs  Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs  Number of external LSA 2. Checksum Sum 0x013118  Number of opaque AS LSA 0. Checksum Sum 0x000000  Number of DCbitless external and opaque AS LSA 0  Number of DoNotAge external and opaque AS LSA 0  Number of areas in this router is 2. 2 normal 0 stub 0 nssa  External flood list length 0     Area BACKBONE(0) (Inactive)         Number of interfaces in this area is 0         Area has no authentication         SPF algorithm executed 2 times         Area ranges are         Number of LSA 1. Checksum Sum 0x00feff         Number of opaque link LSA 0. Checksum Sum 0x000000         Number of DCbitless LSA 0         Number of indication LSA 0         Number of DoNotAge LSA 0         Flood list length 0  

(免责声明:文章内容如涉及作品内容、版权和其它问题,请及时与我们联系,我们将在第一时间删除内容,文章内容仅供参考)

未经允许不得转载:本文采用知识共享 署名4.0国际许可协议 [BY-NC-SA] 进行授权!路由网 » Ospf路由重分部到rip